PRINTER ACCESSORIES & OPTIONS
Micro Printing Systems offers a wide variety of optional printer add-on's and accessories to streamline and perfect any printing application.
TF-100 MANUAL VISION SYSTEM
The VA100 is a manually adjusted alignment system designed for use with MPS's semi-automatic screen printer models TF-100, and SP-1500. The closed-circuit monochrome system includes two video cameras mounted on self-locking, adjustable arms, viewing monitor, and attached LED ringlight.
MYLAR FRAME ALIGNMENT SYSTEM
MPS's Mylar Alignment Fixture reduces the initial set-up procedure to a single print. Only one set-up per print pattern is required. A vacuum hold-down workholder secures substrates in position for printing.
Simply place the Mylar Frame over the substrate and secure it to the X-Y table. Once secured, run a print. The printer will then print your pattern on the mylar film. You can then adjust the X-Y table underneath so your substrate is perfectly aligned directly below the pattern on the mylar film. This is a very effective and cost efficient process of alignment.
FLOOD BLADE ASSEMBLY
The flood blade will spread ink or paste across the screen in preparation for the print stroke. While it's doing this it also pre-loads the mesh openings with material. With the mesh openings already filled, it takes very little effort on the part of the print stroke to transfer that material onto the surface of the substrate.
Flood blade sizes available in 3.5", 5.0", 6.5", and 7.5"
FLOATING SQUEEGEE ASSEMBLY
ATTACK ANGLE SQUEEGEE ASSEMBLY
SQUEEGEE BLADE HOLDERS
Squeegee blade holders available in 3.5", 5.0", 6.5",
The alignment tool is a device used when aligning the squeegee travel rods, and screen frame holder parallel to the work holder.